Kyosemi, ir led, uv led, apd, pd, vecsel, sphelar Kyosemi's Japanese Website Kyosemi's English Website
Kyosemi Corporation Sitemap Terms of Use
About UsProductsContact Us
Products
Optical Communication
InGaAs
Photodiodes
Flip-Chip type
InGaAs Photodiode
(Back surface illuminated type)
Edge Illuminated type
InGaAs Photodiode
InGaAs ROSA
with FPC(Flexible Printed Circuit)
InGaAs PD-TIA
Receivers
Silicon PD-TIA
Receiver
GaAs
PD & PD-TIAs
Si PIN
Photodiodes
Mini Can Si-PD
Laser diodes
VCSEL TOSA
Mini CanVCSEL
Packages
InGaAs
Linear Array
Optical Sensing and Control
LEDs
Point Source LEDs
Parallel Beam LEDs
Multi Wavelength LEDs
Ultra Violet GaN/InGaN LEDs
Visible LEDs
Infrared LEDs
Plastic Mold LEDs
Plastic Mold LEDs
Si PD
Si Photodiodes for General Uses
Si PIN Photodiodes
Si UV sensor
Si High Speed Photodiodes
Si photodiode array
Si PTr
Si APD
GaN/InGaN/AlGaN UV Sensor
InGaAs Photodiode with Peltier cooler
Spherical Micro Solar Cell
Sphelar® Array F12
Sphelar® One
Sphelar® Dome
SphelarVoice®
Quick FAQ for Kyosemi Corporation

Optical Communication Components

Up To 1640nm Super L-band InGaAs Photodiode

KPDE030SL

Features

  • Large active area convenient for optical coupling
  • Wide dynamic range
  • Wide detective wavelength
    (Respond to O-, E-, S-, C- and L-Band)
  • Flat responsivity uniformity
  • Low dark current
  • Low PDL
  • High reliability

Applications

  • DWDM monitoring and control
  • Laser diode and LED power monitor
  • Power Meters
  • Optical measurements and sensing

Description

Reliable planar InGaAs photodiodes are packaged in hermetically sealed cans with the active diameters of 300µm. KPDE030SL Series have wide spectral sensitivity to cover from O to L bands with uniform responsivity. Variations of responsivity are between +0.05 and -0.2 in the wavelength range from 1525 to 1640nm and at the temperature range from -20 to +85°C. KPDE30SL is available as a TO-18 hermetic can type or a pigtail type (KPD030SLT).

Specifications

Absolute Maximum Ratings

Parameter Symbol Value Units
Reverse Voltage VR 20 V
Maximum Optical Power Input Pmax 30 mW
Forward Current IF 50 mA
Oparating Ambient Temperature Ta -40 to +85 °C
Storage Temperature Tstg -40 to +85 °C

Characteristics (VR = 5V, Ta = 25°C unless otherwise noted)

Parameter Symbol Min. Typ. Max. Unit Test Conditions
Active diameter D   300   µm  
Bandwidth B 400 600   MHz Pin = -10dBm, small signal modulation
Responsivity @1310nm R13 0.8 0.9   A/W Ta = -20 to +85°C
@1550nm R15 0.9 1.0   A/W Ta = -20 to +85°C
Dark current ID   0.1 0.6 nA  
Total capacitance C   4.0 6.0 pF f = 1MHz
Chip capacitance Cchip   4.0 6.0 pF f = 1MHz
Responsivity uniformity ΔR -0.2   +0.25 dB λ = 1525 - 1610nm
Ta = -10 to +85°C

Specifications are subject to change without notice.


Copyright (C) 2005-2011 Kyosemi Corporation. All Rights Reserved.